Script Validate - Dell PowerConnect 6224 Command Line Interface Manual

Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the script file
console#script show config.scr
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0
exit

script validate

Use the script validate command in Privileged EXEC mode to validate a
script file by parsing each line in the script file.The validate option is
intended for use as a tool in script development. Validation identifies
potential problems though it may not identify all problems with a given
script.
Syntax
script validate
scriptname — Name of the script file being validated. (Range: 1-31
•
characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
1122
Configuration and Image File Commands
scriptname
config.scr
.