Area Nssa Default-Info-Originate - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
area-id
area nssa
area-id
no area nssa
area-id — Identifies the OSPF not-so-stubby-area. (Range: 0–4294967295)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures not-so-stubby-area 10 as an NSSA.
console(config)#router ospf
console(config-router)#area 10 nssa

area nssa default-info-originate

Use the area nssa default-info-originate command in Router OSPF
Configuration mode to configure the metric value and type for the default
route advertised into the NSSA. The metric type can be comparable (nssa-
external 1) or non-comparable (nssa-external 2). Use the no form of the
command to return the metric value and type to the default value.
Syntax
area-id
area nssa default-info-originate [
comparable ]
area-id
no area nssa default-info-originate
area-id — Identifies the OSPF NSSA to configure. (Range: IP address or
•
decimal from 0–4294967295)
integer
] [ comparable | non-
OSPF Commands
859