Dell PowerConnect 6224 Command Line Interface Manual page 269

Interface
Interval
(seconds)
----------
-------
1/g15
1
show ip dhcp snooping statistics
Use the show ip dhcp snooping statistics command to display the DHCP
snooping filtration statistics.
Syntax
show ip dhcp snooping statistics
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC
User Guidelines
The following fields are displayed by this command:
MAC Verify
Failures
Client Ifc
Mismatch
DHCP Server Msgs The number of DHCP server messages received on untrusted
Trust State
-------------
Yes
The number of DHCP messages that were filtered on an
untrusted interface because of source MAC address and client
MAC address mismatch.
The number of DHCP release and Deny messages received on
the different ports than previously learned.
ports.
Rate Limit
(pps)
-------------
15
DHCP Snooping Commands
Burst
--------
269