Ipv6 Unreachables; Show Dos-Control - Dell PowerConnect 6224 Command Line Interface Manual

Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 icmp error-interval 2000 20

ipv6 unreachables

Use the ipv6 unreachables command to enable the generation of ICMPv6
Destination Unreachable messages. Use the "no" form of this command to
prevent the generation of ICMPv6 Destination Unreachable messages.
Syntax
ipv6 unreachables
no ipv6 unreachables
Default Configuration
ICMPv6 Destination Unreachable messages are enabled by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan10)#ipv6 unreachables

show dos-control

Use the show dos-control command in Privileged EXEC mode to display
Denial of Service configuration information.
1140
Denial of Service Commands