Power Inline Powered-Device - Dell PowerConnect 6224 Command Line Interface Manual

Parameter Ranges
Not applicable
Command Mode
Global Configuration.
Usage Guidelines
No specific guidelines.
Default Value
Legacy Support is disabled by default.
Examples
console(config)# power inline legacy
console(config)# no power inline legacy

power inline powered-device

The power inline powered-device Interface Configuration (Ethernet) mode
command adds a comment or description of the powered device type to
enable the user to remember what is attached to the interface. To remove the
description, use the no form of this command.
Syntax Description
power inline powered-device <
no power inline powered-device
pd-type — Specifies the type of powered device attached to the interface.
•
(Range: 1–24 characters)
Command Mode
Interface Configuration (Ethernet).
Usage Guidelines
No specific guidelines.
pd-type
>
Power Over Ethernet Commands
1171