Dell PowerConnect 6224 Command Line Interface Manual page 492

port > — port number. Values are 1-24 or 1-48 for port_type g, and
– <
1-4 for port_type xg.
Example: xg2 is the 10 gigabit Ethernet port 2.
port-channel number — Specifies a valid port-channel number. Range is 1-
•
8.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the class-of-service queue configuration of the
interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Examples
The following example displays the COS configuration with no unit/port or
port-channel parameter.
console#show interfaces cos-queue
Global Configuration
Interface Shaping Rate......................... 0
Queue Id
Management Type
--------
-------------
0
Drop
492
QoS Commands
Min. Bandwidth
--------------
0
Scheduler Type
--------------
Weighted
Queue
--------
Tail