Dell PowerConnect 6224 Command Line Interface Manual page 480

show class-map
Use the show class-map command in Privileged EXEC mode to display all
configuration information for the specified class.
Syntax
show class-map [
classname — Specifies the valid name of an existing DiffServ class.
•
(Range: 1–31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configuration information for the class
named "Dell".
console#show class-map
Reference Class Name
------------------------------- ----- ----- ---------
--------------------
ipv4
ipv6
stop_http_class
480
QoS Commands
classname
]
Class Name
Class L3
Type Proto
All ipv4
All ipv6
All ipv6