Dell PowerConnect 6224 Command Line Interface Manual page 280

Example
console#show ip arp inspection ethernet
Interface
Interval
---------------
------
1/g1
1
1/g2
10
show ip arp inspection statistics
Use the show ip arp inspection statistics command to display the statistics of
the ARP packets processed by Dynamic ARP Inspection. Given vlan-range
argument, it displays the statistics on all DAI enabled Vlans in that range. In
the case of no argument, it lists the summary of the forwarded and dropped
ARP packets.
Syntax
show ip arp inspection statistics [vlan
vlan-range —A valid VLAN range.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
280
Dynamic ARP Inspection Commands
Trust State
-----------
Untrusted
Untrusted
vlan-range
Rate Limit
(pps)
----------
15
10
]
Burst
(seconds)
---------