Dell PowerConnect 6224 Command Line Interface Manual page 570

Syntax
tacacs-server key [
no tacacs-server key
key-string — Specifies the authentication and encryption key for all
•
TACACS communications between the switch and the TACACS+ server.
This key must match the key used on the TACACS+ daemon. (Range:
0–128 characters)
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the authentication encryption key.
console(config)#tacacs-server key dell-s
tacacs-server timeout
Use the tacacs-server timeout command in Global Configuration mode to set
the interval during which a switch waits for a server host to reply. To restore
the default, use the no form of this command.
Syntax
tacacs-server timeout [
no tacacs-server timeout
timeout — The timeout value in seconds. (Range: 1–30)
•
Default Configuration
The default value is 5 seconds.
570
TACACS+ Commands
key-string ]
timeout ]