Enable - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
captive-portal
Default Configuration
There is no default configuration for this command.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#captive-portal
console(config-CP)#

enable

Use the enable command to globally enable captive portal. Use the "no" form
of this command to globally disable captive portal.
Syntax
enable
no enable
Default Configuration
Captive Portal is disabled by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
1062
Captive Portal Commands