Show Captive-Portal User - Dell PowerConnect 6224 Command Line Interface Manual

Default Configuration
There is no default configuration for this command.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#no user 1

show captive-portal user

Use the show captive-portal user command to display all configured users or a
specific user in the captive portal local user database.
Syntax
show captive-portal user [ user-id ]
user-id — User ID (Range: 1–128).
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
Session
1081
Captive Portal Commands