Ip Rip Authentication - Dell PowerConnect 6224 Command Line Interface Manual

ip rip
Use the ip rip command in Interface Configuration mode to enable RIP on a
router interface. Use the no form of the command to disable RIP on the
interface.
Syntax
ip rip
no ip rip
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
console(config-if-vlan2)#ip rip
console(config-if-vlan2)#no ip rip

ip rip authentication

Use the ip rip authentication command in Interface Configuration Mode to
set the RIP Version 2 Authentication Type and Key for the specified interface.
Use the no form of the command to return the authentication to the default
value.
Syntax
ip rip authentication {none | {simple
no ip rip authentication
key — Authentication key for the specified interface. (Range: 16 bytes or
•
less)
key
} | {encrypt
Routing Information Protocol Commands
key key-id
}}
1021