Debug Ipv6 Pimdm - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
debug ipv6 mld packet [ receive | transmit ]
no debug ipv6 mld packet [ receive | transmit ]
Default Configuration
Display of MLD traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug ipv6 mld packet

debug ipv6 pimdm

Use the debug ipv6 pimdm command to trace PIMDMv6 packet reception
and transmission. The receive option traces only received PIMDMv6 packets
and the transmit option traces only transmitted PIMDMv6 packets. When
neither keyword is used in the command, then all PIMDMv6 packet traces are
dumped. Vital information such as source address, destination address,
control packet type, packet length, and the interface on which the packet is
received or transmitted is displayed on the console. Use the "no" form of this
command to disable PIMDMv6 tracing.
Syntax
debug ipv6 pimdm packet [ receive | transmit ]
no debug ipv6 pimdm packet [ receive | transmit ]
Default Configuration
Display of PIMDMv6 traces is disabled by default.
1211
Serviceability Tracing Packet Commands