Dell PowerConnect 6224 Command Line Interface Manual page 842

Syntax
show ip mcast
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide multicast information.
console#show ip mcast
Admin Mode.....................................
Enabled
Protocol State................................. Non-
Operational
Table Max Size ................................ 256
Protocol....................................... PIMDM
Multicast Forwarding Cache Entry Count ........ 0
show ip mcast boundary
Use the show ip mcast boundary command in Privileged EXEC mode to
display all the configured administrative scoped multicast boundaries.
Syntax
vlan-id
show ip mcast boundary {vlan | all}
vlan-id — Valid VLAN ID.
•
842
Multicast Commands