Dell PowerConnect 6224 Command Line Interface Manual page 971

NSF Helper
Support
NSF Helper Strict
LSA Checking
Redistributing
Source
Tag
Subnets
Distribute-List
Example
The following example enables OSPF traps.
console#show ipv6 ospf
Router ID......................................
0.0.0.2
OSPF Admin Mode................................
Enable
ASBR Mode......................................
Disable
ABR Status.....................................
Disable
Exit Overflow Interval......................... 0
External LSA Count............................. 0
External LSA Checksum.......................... 0
New LSAs Originated............................ 0
LSAs Received.................................. 0
Whether this router is configured to act as a graceful restart
helpful neighbor. Possible values are: Helper Support Always,
Disabled, or Planned.
As a graceful restart helpful neighbor, whether to terminate the
helper relationship if a topology change occurs during a
neighbor's graceful restart.
This field is a heading and appears only if you configure the
system to take routes learned from a non-OSPF source and
advertise them to its peers.
Shows source protocol/routes that are being redistributed.
Possible values are static, connected, or RIP .
Shows the decimal value attached to each external route.
When this option is not configured, OSPF will only redistribute
classful prefixes.
Shows the access list used to filter redistributed routes.
OSPFv3 Commands
971