Dell PowerConnect 6224 Command Line Interface Manual page 846

Example
The following example displays the multicast configuration settings such as
flags, timer settings, incoming and outgoing interfaces.
console#show ip mcast mroute group 224.5.5.5 summary
Multicast Route Table Summary
g
Source IP Group
IP
--------- --------------- --------- --------- -------
---------
console#show ip mcast mroute group 224.5.5.5 detail
Multicast Route Table
Source Ip Group Ip
Neighbor
--------- --------- ----------- --------- -----------
---- -----
show ip mcast mroute source
Use the show ip mcast mroute source command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
sourceipaddr
or
Syntax
show ip mcast mroute source
sourceipaddr — IP address of source.
•
groupipaddr — IP address of multicast group.
•
846
Multicast Commands
Protocol Interface Interface List
Expiry
Time(secs)
Flags
sourceipaddr
|
sourceipaddr
Up Time
(secs)
groupipaddr
pair value(s).
{summary |
Incoming Outgoin
RPF
groupipaddr
}