Show Switchport Voice - Dell PowerConnect 6224 Command Line Interface Manual

show switchport voice

Use the show switchport voice command to show the status of auto-voip on
an interface or all interfaces.
Syntax
show switchport voice [interface {ethernet
• ethernet
• port-channel
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show switchport voice
Interface
---------
1/g1
1/g2
1/g3
1/g4
1/g5
1/g6
1/g7
562
Switchport Voice Commands
interface —Specifies a valid interface. The full syntax is unit/port.
index — Specifies the port-channel number.
Auto VoIP Mode Traffic Class
-------------- -------------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
interface
| port-channel
6
6
6
6
6
6
6
index
}]