Management Access-List - Dell PowerConnect 6224 Command Line Interface Manual

management access-list

Use the management access-list command in Global Configuration mode to
define an access list for management, and enter the access-list for
configuration. Once in the access-list configuration mode, the denied or
permitted access conditions are configured with the deny and permit
commands. To remove an access list, use the no form of this command.
Syntax
name
management access-list
name
no management access-list
name — The access list name. (Range: 1–32 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command enters the access-list configuration mode, where the denied or
permitted access conditions with the deny and permit commands must be
defined.
If no match criteria are defined the default is deny.
If reentering to an access-list context, the new rules are entered at the end of
the access-list.
Use the management access-class command to select the active access-list.
The active management list cannot be updated or removed.
Examples
The following example shows how to configure two management interfaces,
Ethernet 1/g1 and Ethernet 2/g9.
console(config)#management access-list mlist
1152
Management ACL Commands