Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IPv6_Addressing.fm
Default Configuration
MLD version 1.
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode
console(config)# interface vlan 1
console(config-if)# ipv6 mld version 2
ipv6 mld join-group
Use the ipv6 mld join-group Interface Configuration mode command to
configure Multicast Listener Discovery (MLD) reporting for a specified
group. Use the no form of this command to cancel reporting and leave the
group.
Syntax
group-address
ipv6 mld join-group
group-address
no ipv6 mld join-group
Parameters
group-address—Specifies the IPv6 address of the multicast group.
Default Configuration
Command Mode
Interface Configuration (Ethernet, VLAN, Port-channel) mode
User Guidelines
The ipv6 mld join-group command configures MLD reporting for a specified
group. The packets that are addressed to a specified group address will be
passed up to the client process in the device.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
639
IPv6 Addressing Commands
Advertisement
Table of Contents
