overflow:
overflow....................Enabled
retransmit:
packets..........................Disabled
packets.....................Disabled
rtb:
info...................Disabled
state-change:
all..............................Disabled
snmp-server community
Use the snmp-server community command in Global Configuration mode to
set up the community access string to permit access to the SNMP protocol.
To remove the specified community string, use the no form of this command.
This Command places the user in SNMP-Community-Configuration mode.
Syntax
snmp-server community
ipaddress
] [view
no snmp-server community
community-string — Permits access to the SNMP protocol. (Range: 1-20
•
characters)
— Indicates read-only access
ro
•
— Indicates read-write access.
rw
•
— Indicates SNMP administrator access.
su
•
1244
SNMP Commands
lsdb-
lsdb-approaching-overflow........Enabled
virt-
rtb-entry-
if state change..................Enabled
neighbor state change............Enabled
virtif state change..............Disabled
virtneighbor state change........Disabled
community
viewname
]
community-string
string
-
{ro | rw | su} [ipaddress