Dell PowerConnect 6224 Command Line Interface Manual page 696

show ip igmp groups
Use the show ip igmp groups command in Privileged EXEC mode to display
the registered multicast groups on the interface. If detail is specified, this
command displays the registered multicast groups on the interface in detail.
Syntax
show ip igmp groups interface vlan
vlan-id — Valid VLAN ID
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the registered multicast groups for VLAN 1.
console#show ip igmp groups interface vlan 3 detail
Group
Multicast
Compat
IP Address
Mode
---------------
---- ------
225.0.0.5
00:04:15 v2
696
IGMP Commands
REGISTERED MULTICAST GROUP DETAILS
Last Up
Reporter Time
------------ ----------
1.1.1.5
vlanid
[detail]
Expiry
Time
---------
00:00:05 00:04:15
Version1 Version2
Host Host
Timer Timer
-------
------
----