ip bgp dampening clear
Clears the dampening history data for all routes on the router, resetting route flap counters and unsuppress-
ing any routes that had been suppressed due to route flapping violations.
ip bgp dampening clear
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use this command to clear all of the currently stored information on routes for dampening purposes.
When this command is entered, all route information in regards to dampening is cleared.
•
BGP dampening of IPv6 route flaps is currently not supported.
Examples
-> ip bgp dampening clear
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp dampening
MIB Objects
alaBgpGlobal
alaBgpDampeningClear
page 25-30
Enables or disables route dampening.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012