BGP Commands
ip bgp confederation neighbor
Configures this peer as a member of the same confederation as the local BGP speaker.
ip bgp confederation neighbor ip_address
no ip bgp confederation neighbor ip_address
Syntax Definitions
ip_address
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to disable this feature.
•
You must first assign a confederation number to the local BGP speaker before assigning peers to the
confederation. Use the
the local BGP speaker.
•
The BGP peer is restarted after issuing this command.
Examples
-> ip bgp confederation neighbor 172.22.2.115
-> no ip bgp confederation neighbor 172.22.2.115
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp confederation identifier
MIB Objects
alaBgpPeerTable
alaBgpPeerAddr
alaBgpPeerConfedStatus
OmniSwitch CLI Reference Guide
32-bit IP address of the peer.
ip bgp confederation identifier
Sets a confederation identification value for the local BGP speaker
(this router).
June 2012
command to assign a confederation number to
page 25-83