Show Ip Isis Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

IS-IS Commands

show ip isis status

Displays the IS-IS status.
show ip isis status
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> show isis status
==========================================================
ISIS Status
==========================================================
System Id : 0050.0500.5001
Admin State
Last Enabled : WED OCT 24 10:05:55 2007
Level Capability
Authentication Check
Authentication Type
Graceful Restart
GR helper-mode
LSP Lifetime
LSP Wait
Adjacency Check
L1 Auth Type
L2 Auth Type
L1 Wide Metrics-only
L2 Wide Metrics-only
L1 LSDB Overload
L2 LSDB Overload
L1 LSPs
L2 LSPs
Last SPF
SPF Wait
Hello-Auth Check
Csnp-Auth Check
Psnp-Auth Check
L1 Hello-Auth Check
L1 Csnp-Auth Check
L1 Psnp-Auth Check
OmniSwitch CLI Reference Guide
: UP
: L1L2
: True
: None
: Disabled
: Disabled
: 1200
: Max :5 sec, Initial :0 sec, Second :1 sec
: Loose
: None
: None
: Disabled
: Disabled
: Disabled
: Disabled
: 177
: 177
: FRI OCT 26 05:04:09 2007
: Max :10000 ms, Initial :1000 ms, Second :1000 ms
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
June 2012 page 24-53