Show Ip Isis Spf-Log - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip isis spf-log

Displays the IS-IS SPF log.
show ip isis spf-log [detail]
Syntax Definitions
detail
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
This command displays the last 20 IS-IS SPF events.
Examples
-> show ip isis spf-log
ISIS SPFLog
==============================================================================
When Duration
-------------------------------------------------------------------------------
01/30/2005 11:01:54 <0.01s 1
-------------------------------------------------------------------------------
Log Entries : 1
output definitions
When
Duration
L1-Nodes
L2-Nodes
Event-Count
Log Entries
-> show ip isis spf-log detail
=============================================================================
ISIS SPFLog
=============================================================================
SpfTimeStamp
spfRunTime
Spf Involved L1 Nodes :
Spf Involved L2 Nodes :
Spf Event-count
Last TriggeredLspId
page 24-48
Indicates that the output is displayed in a detailed manner.
L1-Nodes L2-Nodes
The date on which the SPF calculation was completed.
The time duration of the event.
The number of Level-1 nodes.
The number of Level-2 nodes.
The number of SPF calculations.
The total number of log entries.
: SUN OCT 01 05:15:29 2006
: 0
69
71
: 169
: 0020.0200.2001.00-4a
Event-Count
1 3
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012