Ip Bgp Neighbor In-Communitylist - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp neighbor in-communitylist

Assigns an inbound community list filter to a BGP peer.
ip bgp neighbor ip_address in-communitylist {string | none}
Syntax Definitions
ip_address
string
none
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The community filter list name (InboundCommlist in the example below) is created using the
policy community-list
filter before being accepted or passed to inbound policy.
•
To deassign an input community filter list, use this command to assign a value of "none."
Examples
-> ip bgp neighbor 172.22.2.115 in-communitylist InboundCommlist
-> ip bgp neighbor 172.22.2.115 in-communitylist none
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy community-list
MIB Objects
alaBgpPeerTable
alaBgpPeerCommunityListIn
OmniSwitch CLI Reference Guide
32-bit IP address of the BGP peer.
Input community list (0 to 70 characters. This name is case sensitive.
Removes this community list from the peer.
command. Any inbound routes from the BGP peer must match this community
Creates or deletes a community list.
June 2012
ip bgp
page 25-87