Show Ip Isis Routes - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip isis routes

Displays the IS-IS route information from the routing table.
show ip isis routes
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> show isis routes
=================================================================================
ISIS Routes
=================================================================================
Prefix
---------------------------------------------------------------------------------
1.1.1.0/24
2.2.2.0/24
3.3.3.0/24
4.4.4.0/24
5.5.5.0/24
6.6.6.0/24
---------------------------------------------------------------------------------
Routes : 8
=================================================================================
output definitions
Prefix
Metric
Lvl/Type
SPF-num
Nexthop
System ID
page 24-44
Metric Lvl/Type
10 1/Int
10 1/Int
10 1/Int
10 1/Int
10 1/Int
10 1/Int
The IP prefix and mask of the destination routes.
The cost to reach the destination route.
The level and route type of the routes.
The version of the SPF calculation used to select the route.
The Next Hop address to reach the destination.
The system ID of the adjacent router. The system ID is a fixed size, six
octet field in the NSAP. In an IS-IS routing domain, each router is iden-
tified by a 6-octet hexadecimal system ID.
SPF-num Nexthop
7 0.0.0.0
1 0.0.0.0 1720.2116.0051
1 0.0.0.0
1 0.0.0.0
1 0.0.0.0 1720.2116.0051
1 0.0.0.0
OmniSwitch CLI Reference Guide
IS-IS Commands
System ID
1720.2116.0051
1720.2116.0051
1720.2116.0051
1720.2116.0051
June 2012