BGP Commands
ip bgp neighbor clear
Restarts a BGP peer. The peer will be unavailable during this restart.
ip bgp neighbor ip_address clear
Syntax Definitions
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use this command whenever changes occur to BGP-related access lists, weights, distribution lists,
timer specifications, or administrative distance.
•
Many peer commands restart the peer as soon as they are configured. The following commands restart
the BGP peer for which they are configured:
ip bgp neighbor remote-as
ip bgp neighbor md5 key
ip bgp neighbor passive
ip bgp neighbor ebgp-multihop
ip bgp neighbor maximum-prefix
ip bgp neighbor update-source
ip bgp neighbor next-hop-self
ip bgp neighbor soft-reconfiguration
ip bgp neighbor route-reflector-client
ip bgp confederation neighbor
ip bgp neighbor remove-private-as
ip bgp neighbor
•
You do not need to issue the
commands.
Examples
-> ip bgp neighbor 172.22.2.115 clear
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
32-bit IP address of the neighbor.
update-source.
ip bgp neighbor clear
June 2012
command after issuing any of the above
page 25-57