Ip Bgp Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp status

Administratively enables or disables BGP. The BGP protocol will not be active until you enable it using
this command.
ip bgp status {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
You must first load the BGP software into running memory using the
initiating this command.
•
Many BGP commands require that the protocol be disabled
Examples
-> ip bgp status enable
-> ip bgp status disable
Release History
Release 6.1; command was introduced.
Related Commands
ip load bgp
MIB Objects
alaBgpGlobal
alaBgpProtoStatus
OmniSwitch CLI Reference Guide
Enables BGP.
Disables BGP.
default
disable
Loads the BGP software.
June 2012
ip load bgp command before
(ip bgp status) before issuing them.
page 25-7