IS-IS Commands
ip isis interface level hello-interval
Configures the time interval between the successive Hello PDUs for the specified IS-IS level of an inter-
face.
ip isis interface interface_name level [1 | 2] hello-interval seconds
no ip isis interface interface_name level [1 | 2] hello-interval
Syntax Definitions
interface_name
seconds
Defaults
parameter
seconds (designated routers)
seconds
(non-designated routers)
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
Use the no form of this command to restore the default settings.
Examples
-> ip isis interface man-1 level 1 hello-interval 50
-> no isis interface wan-876 level 2 hello-interval
Release History
Release 6.2.1; command was introduced.
Related Commands
show ip isis interface
MIB Objects
vRtrIsisIfLevelTable
vRtrIsisIfLevelHelloTimer
OmniSwitch CLI Reference Guide
The name of the interface.
The Hello interval, in seconds. The valid range is 1–20000.
default
3
9
Displays the IS-IS interface information.
June 2012
page 24-73