show ip isis summary-address
Displays the IS-IS summary address database.
show ip isis summary-address [ip-addr [/mask]]
Syntax Definitions
ip-addr
/mask
Defaults
By default summary address information for all the IP addresses is displayed.
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
Use the ip-addr parameter with this command to view the summary address information for a specific IP
address.
Examples
-> show ip isis summary-address
=========================================================================
ISIS Summary Address
======================================================
Address
-------------------------------------------------------------------------------
1.0.0.0/8
2.1.0.0/24
3.1.2.3/32
-------------------------------------------------------------------------------
Summary Address : 3
output definitions
Address
Level
Summary Address
Release History
Release 6.2.1; command was introduced.
page 24-58
The 32-bit IP address.
The netmask value. The valid range is 1–32.
Level
L1
L1L2
L2
The summary address for a range of IPv4 addresses.
The capability level of the router.
The number of summarized addresses.
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012