IS-IS Commands
ip isis interface retransmit-interval
Configures the minimum time interval between LSP retransmissions on a point-to-point interface.
ip isis interface interface_name retransmit-interval seconds
no ip isis interface interface_name retransmit-interval
Syntax Definitions
interface_name
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
Use the no form of this command to restore the default settings.
Examples
-> ip isis interface lan-3 retransmit-interval 130
-> no ip isis interface lan-4 retransmit-interval
Release History
Release 6.2.1; command was introduced.
Related Commands
show ip isis interface
MIB Objects
vRtrIsisIfTbale
vRtrIsisIfRetransmitInterval
OmniSwitch CLI Reference Guide
The name of the interface.
The minimum time interval (1–65535) in seconds between LSP trans-
missions on a point-to-point interface.
default
5
Displays the IS-IS interface information.
June 2012
page 24-69