IS-IS Commands
ip isis interface lsp-pacing-interval
Configures the time interval between IS-IS LSP PDUs sent from the specified interface.
ip isis interface interface_name lsp-pacing-interval milliseconds
no ip isis interface interface_name lsp-pacing-interval
Syntax Definitions
interface_name
milliseconds
Defaults
parameter
milliseconds
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to restore the default settings.
•
No LSPs are sent from the specified interface if the time interval is set to 0.
Examples
-> ip isis interface vlan-101 lsp-pacing-interval 120
-> no ip isis interface vlan-101 lsp-pacing-interval
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis lsp-lifetime
ip isis lsp-wait
show ip isis interface
MIB Objects
vRtrIsisIfTable
vRtrIsisIfLspPacingInterval
OmniSwitch CLI Reference Guide
The name of the interface.
The time interval in milliseconds (from 0 to 65535) between IS-IS
LSPs.
default
100
Configures the time interval for which LSPs generated by a router is
considered valid by other routers in the same domain.
Configures the time interval between successively generated LSPs.
Displays the IS-IS interface information.
June 2012
page 24-67