Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1504

output definitions (continued)
Desg IS
Auth Type
Metric
Hello Timer
Hello Mult
Priority
Passive
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis interface
MIB Objects
isisCircTable
isisCircLocalID
isisCircAdminState
isisCircType
isisCircLevel
isisCircPassiveCircui
isisCircMeshGroup
isisCircLevelTable
isisCircLevelISPriority
isisCircLevelCircID
isisCircLevelDesIS
isisCircLevelHelloMultiplier
isisCircLevelHelloTimer
isisCircLevelCSNPInterval
vRtrIsisIfTable
vRtrIsisIfAdminState
vRtrIsisIfOperState
vRtrIsisIfCsnpInterval
vRtrIsisIfHelloAuthKey
vRtrIsisIfHelloAuthType
vRtrIsisIfLspPacingInterval
vRtrIsisIfRetransmitInterval
vRtrIsisIfLevelTable
vRtrIsisIfLevelHelloAuthKey
vRtrIsisIfLevelHelloAuthType
vRtrIsisIfLevelPassive
vRtrIsisIfLevelNumAdjacencies
vRtrIsisIfLevelISPriority
vRtrIsisIfLevelHelloTimer
page 24-82
The ID of the LAN Designated Intermediate System on this circuit at this
level.
Indicates the authentication type (simple, MD5, or none) for the speci-
fied level.
The metric value of this circuit for a specific level.
Indicates the Hello timer value.
Indicates the Hello multiplier value.
The priority value of the interface.
Indicates whether the interface is configured as a passive interface (Yes
or No).
Creates an IS-IS interface.
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012