Ip Isis Interface - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip isis interface

Creates an IS-IS interface.
ip isis interface interface_name
no ip isis interface interface_name
Syntax Definitions
interface_name
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to remove the IS-IS interface.
•
The interface name cannot contain spaces.
Examples
-> ip isis interface vlan-101
-> no ip isis interface vlan-101
Release History
Release 6.2.1; command was introduced.
Related Commands
show ip isis interface
MIB Objects
vRtrIsisIfTable
vRtrIsisIfRowStatus
page 24-60
The name of the IS-IS interface.
Displays the IS-IS interface information.
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012