Ip Isis Interface Csnp-Interval - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Alcatel-lucent omniswitch 6850-48: reference guide
Hide thumbs Also See for OmniSwitch 6850-48:
Table of Contents

Advertisement

IS-IS Commands

ip isis interface csnp-interval

Configures the time interval to send CSNPs from the specified interface.
ip isis interface interface_name csnp-interval seconds
no ip isis interface interface_name csnp-interval
Syntax Definitions
interface_name
seconds
Defaults
parameter
seconds (broadcast)
seconds (point-to-point)
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
Use the no form of this command to restore the settings to the default value.
Examples
-> ip isis interface vlan-101 csnp-interval 50
-> no ip isis interface vlan-101 csnp-interval
Release History
Release 6.2.1; command was introduced.
Related Commands
show ip isis interface
MIB Objects
vRtrisisIftable
vRtrIsisIfCsnpInterval
OmniSwitch CLI Reference Guide
The name of the interface.
The time interval (1–65535) in seconds between successive CSNP
PDUs sent on this interface.
default
10
5
Displays the IS-IS interface information.
June 2012
page 24-63

Advertisement

Table of Contents
loading

Table of Contents