Display Rmon Statistics - 3Com Switch 4500 Family Manual

Linked with event
When startup enables: risingOrFallingAlarm
This entry will exist: forever
Latest value

display rmon statistics

Syntax
display rmon statistics [ interface-type interface-number | unit unit-number ]
View
Any view
Parameters
interface-type: Interface type.
interface-number: Interface number.
unit unit-number: Specifies a unit number.
Description
Use the display rmon statistics command to display the RMON statistics on a specified port or a
specified unit. If you do not specify the port or the unit, this command displays the RMON statistics on all
the ports or units.
The information displayed includes the number of:
Collisions
Packets with CRC errors
Undersize/Oversize packets
Broadcast/multicast packets
Received bytes
Received packets
Related commands: rmon statistics.
Examples
# Display the RMON statistics on Ethernet 1/0/1 port.
<Sysname> display rmon statistics Ethernet 1/0/1
Statistics entry 1 owned by user1-rmon is VALID.
Field
Event index corresponding to an alarm
The condition under which an alarm is triggered,
which can be:
risingOrFallingAlarm: An alarm is triggered
when the rising or falling threshold is
reached.
risingAlarm: An alarm is triggered when the
rising threshold is reached.
FallingAlarm: An alarm is triggered when the
falling threshold is reached.
Existing period. This entry can exist forever or
exist in the specified cycle
The value of the latest sample
2-7
Description