Ix30 Front View - Digi IX30 User Manual

Digi IX30 hardware reference

IX30 front view

Number Item
1 Digital/analog
I/O connector
2 Ground screw
3 LEDs
4 Cellular
antenna
connectors
5 GNSS antenna
connector
6 Power suppy
7 Serial port
8 ERASE button
IX30 User Guide
Decription
An input/output connector with four digital input/output connections
and four analog input connections. See
analog input connections
Electric ground screw for fastening a grounding wire.
IX30 LEDs
See .
Main (WWAN1) and auxiliary (WWAN2) cellular antenna connectors.
WARNING! For Class I, Division 2 Hazardous Location
applications: Antennas intended for use with the product
must be installed within the end use enclosure. For
external mounting of the antennas, routing and
installation of the antennas shall be in accordance with
the appropriate location regulations
IX30 power supply requirements.
See Digi IX30 serial connector pinout
port pin-out.
The ERASE button is used to perform a device reset, and it has three
modes:
1. Configuration reset: Pressing the ERASE button one time will
reset the device configurations to the factory default. It will
not remove any automatically generated certificates and
keys.
2. Full device reset: After the device reboots from the first
button press, press the ERASE button again before the device
is connected to the internet to also remove generated
Digital input/output and
for more information and wiring diagrams.
for information about the serial
IX30 front view
24