Table of Contents
Advertisement
Routing
fd00:2704::/64
fd00:2704::/48
2147483647
fe80::204:f3ff:fe80:e231
fe80::204:f3ff:ff80:c525
fe80::/64
fe80::/64
default
default
IPv4 Route
----------
eth1
modem
IPv6 Route
----------
eth1
modem
>
You can limit the display to only IPv4 entries by using show route ipv4, or to IPv6 entries by
using show route ipv6. You can also display more information by adding the verbose option
to the show route and show route ip_type commands.
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Dynamic DNS
The Domain Name System (DNS) uses name servers to provide a mapping between computer-
readable IP addresses and human-readable hostnames. This allows users to access websites and
personal networks with easy-to-remember URLs. Unfortunately, IP addresses change frequently,
invalidating these mappings when they do. Dynamic DNS has become the standard method of
addressing this problem, allowing devices to update name servers with their new IP addresses.
By providing the IX20 device with the domain name and credentials obtained from a dynamic DNS
provider, the router can automatically update the remote nameserver whenever your WAN or public
IP address changes.
Your IX20 device supports a number of Dynamic DNS providers as well as the ability to provide a
custom provider that is not included on the list of providers.
Configure dynamic DNS
This section describes how to cofigure dynamic DNS on a IX20 device.
Required configuration items
Add a new Dynamic DNS service.
n
The interface that has its IP address registered with the Dynamic DNS provider.
n
IX20 User Guide
fe80::204:f3ff:fe80:e231
fe80::204:f3ff:fe80:e231
fe80::204:f3ff:fe80:e231
Load Balance (%)
----------------
75.0
25.0
Load Balance (%)
----------------
75.0
25.0
Dynamic DNS
1
1
1
256
256
1
1024
258
Advertisement
Table of Contents
