Table of Contents
Advertisement
IGMP
IGMP S
C
AND
NOOPING
OMMANDS
-
IP IGMP SNOOPING FAST
LEAVE
ip igmp snooping fast-leave
Overview
Use this command to enable IGMP Snooping fast-leave processing. Fast-leave
processing is analogous to immediate-leave processing. The IGMP
group-membership entry is removed as soon as an IGMP leave group message is
received, without sending out a group-specific query.
Use the no variant of this command to disable fast-leave processing.
ip igmp snooping fast-leave
Syntax
no ip igmp snooping fast-leave
Default
IGMP Snooping fast-leave processing is disabled.
Mode
Interface Configuration for a VLAN interface.
Usage notes
This IGMP Snooping command can only be configured on VLAN interfaces.
Example
To enable fast-leave processing on vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related
show ip igmp interface
commands
show running-config
C613-50644-01 Rev B
configure terminal
interface vlan2
ip igmp snooping fast-leave
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
993
Advertisement
Table of Contents
