Allied Telesis IE220 Series Manual page 1001

IGMP IGMP S C
AND NOOPING OMMANDS
IP IGMP SNOOPING TCN QUERY SOLICIT
See the
information about the Query Solicitation feature.
Examples To enable Query Solicitation on a device, use the commands:
awplus#
awplus(config)#
To disable Query Solicitation on a device, use the commands:
awplus#
awplus(config)#
To enable Query Solicitation for vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable Query Solicitation for vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip igmp query-holdtime
commands
show ip igmp interface
show running-config
Command Version 5.4.7-1.1: VRF-lite support added SBx8100.
changes
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
C613-50644-01 Rev B
Command
issued from Command issued
Global from Interface
Configuration Configuration
No Yes
Yes No
Yes Yes
IGMP Feature Overview and Configuration Guide
configure terminal
ip igmp snooping tcn query solicit
configure terminal
no ip igmp snooping tcn query solicit
configure terminal
interface vlan2
configure terminal
interface vlan2
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Device is STP Root
Bridge or the
EPSR Master Node
Yes
Yes
Yes
ip igmp snooping tcn query solicit
no ip igmp snooping tcn query solicit
IGMP Query Solicit
message sent on VLAN
Yes
No
Yes
for introductory
1001