Show Storm-Control - Allied Telesis AT-x210-9GT Command Reference Manual

S C
WITCHING OMMANDS
-
SHOW STORM CONTROL

show storm-control

Overview Use this command to display storm-control information for all interfaces or a
particular interface.
Syntax
show storm-control [<port>]
Mode User Exec and Privileged Exec
Example To display storm-control information for port1.0.2, use the following
command:
awplus#
Output Figure 10-14: Example output from the show storm-control command for
Example To display storm-control information for all ports, use the following command:
awplus#
358
Parameter Description
The port to display information about. The port may be a switch port
<port>
(e.g. port1.0.4), a static channel group (e.g. sa2), or a dynamic
(LACP) channel group (e.g. po2).
show storm-control port1.0.2
port1.0.2
Port BcastLevel
port1.0.2 40. 0%
show storm-control
Command Reference for x210 Series Edge Switches
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
McastLevel DlfLevel
100. 0% 100. 0%
C613-50054-01 REV A