Show Storm-Control - Allied Telesis AT-x930-28GTX Command Reference Manual

S C
WITCHING OMMANDS
-
SHOW STORM CONTROL

show storm-control

Overview Use this command to display storm-control information for all interfaces or a
particular interface.
show storm-control [<port>]
Syntax
Mode User Exec and Privileged Exec
Example To display storm-control information for port1.0.2, use the following command:
awplus#
Output Figure 14-11: Example output from the show storm-control command for
Related storm-control level
Commands
C613-50100-01 REV C
Parameter Description
<port>
The port to display information about. The port may be a switch port
(e.g. port1.0.4), a static channel group (e.g. sa2), or a dynamic (LACP)
channel group (e.g. po2).
show storm-control port1.0.2
port1.0.2
Port BcastLevel
port1.0.2 40. 0%
Command Reference for x930 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
McastLevel DlfLevel
100. 0% 100. 0%
498