Communication - Siemens SIMOCODE pro System Manual

Communication

In this chapter
In this chapter you will find information about the options of SIMOCODE pro
communication, e.g. communication with a PLC. The default receive, send
and diagnostics data settings are sufficient for almost all applications and as
such, the parameterization only has to be changed to a small extent.
Otherwise, you can adapt the settings of the individual bits specifically for
your application.
Target groups
This chapter is addressed to the following target groups:
• Configurators
• PLC programmers.
Necessary knowledge
You will require the following knowledge:
• The principle of connecting plugs to sockets
• Knowledge about PROFIBUS DP .
Navigation in SIMOCODE ES
You will find the following dialogs in SIMOCODE ES:
Device Parameters > Bus Parameters
Further function blocks > Outputs > Acyclic send data
Further function blocks >Outputs > Cyclic send data.
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
12
12-1