Siemens SIMOCODE pro System Manual page 30

System description
Recording, displaying and evaluating measured values
The following measured values are required for monitoring the process:
• The pump motor current, which is measured by the current measuring
module.
• The analog value of the fill-level indicator, which is measured by the analog
module.
The measured values are evaluated directly by SIMOCODE pro and/or
transferred via PROFIBUS DP to the PLC/PCS.
Any measured value can be output via the analog module, e.g. the effective
motor current on a connected pointer instrument.
Optionally, a laptop with the SIMOCODE ES software, for example, can be
connected to the operator panel so that further process data can be locally
evaluated.
1-12
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03