Siemens SIMOCODE pro System Manual page 265

Response at pre-warning
Here you can set the response required after the second to last start:
See also "Tables of responses of SIMOCODE pro" in
information"
Interlocking time
If a new start command is issued within the time range for starts after the
last permissible start, this new start command will no longer be executed if
the setting "Response at overshoot - Tripping" has been set. "Trip - No. of
starts >" will be displayed and the set interlocking time activated.
Interlocking time:
SIMOCODE pro
GWA 4NEB 631 6050- 22 DS 03
and Table 5-15.
00:00:00 to 18:12:15 hh:mm:ss
Monitoring functions
Chapter "Important
5-21