Motor Protection - Siemens SIMOCODE pro System Manual

Motor management and control devices

Hide thumbs Also See for SIMOCODE pro:

Table of Contents

Motor protection

In this chapter

In this chapter you will find information about motor protection.

Motor protection includes

• Overload protection

• Unbalance protection

• Stalled rotor protection

• Thermistor protection.

Motor protection operates alongside motor control "at a higher level in the

background". All motor protection parameters are explained here. They can

be active or not, according to the control function selected.

Target groups

This chapter is addressed to the following target groups:

• Configurators

• Commissioners.

Necessary knowledge

You will require the following knowledge:

• Good knowledge of SIMOCODE pro

• The principle of connecting plugs to sockets

• Knowledge of electrical drive engineering.

Navigation in SIMOCODE ES

You will find the dialogs in SIMOCODE ES under:

Device Parameters > Motor Protection.

SIMOCODE pro

GWA 4NEB 631 6050-22 DS 03