Siemens SIMOCODE pro System Manual page 53

Motor management and control devices

Hide thumbs Also See for SIMOCODE pro:

Table of Contents

The following figure shows an operator panel with display:

Fig. 1-11: Operator panel with display

The operator panel with display can be connected directly to basic unit 2 or

an expansion module via the rear system interface. Voltage is supplied by

the basic unit. A PC (via a PC cable with SIMOCODE ES software), the

memory module or the addressing plug can be connected to the front

system interface (with a cover for IP54).

The operator panel with display may not be removed or plugged in during

When using an operator panel with display, the type and number of

expansion modules that can be connected to a basic unit are limited! See

SIMOCODE pro

GWA 4NEB 631 6050-22 DS 03

System description