Siemens SIMOCODE pro System Manual page 309

Schematic
The following schematic shows the "Analog Value Recording" function block:
Fig. 8-2: Schematic of the "Analog Value Recording" function block
Settings
Trigger input
Allocated analog value
Trigger edge
Sampling rate
Pre-trigger
Table 8-1: "Analog value recording" settings
Application example
Record the motor current when the motor starts/sampling time = 12 s/pre-
trigger = 25% (3 s):
Fig. 8-3: Application example of the analog value recording
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
Analog value recording
Trigger input
Assigned
analog value
Signal/value
Motor current flowing
Positive
0.2 s
Max. current I_max
25 %
Analog value recording
Trigger edge
Sampling rate
Pre-trigger
Range
Activate the analog value recording with
any signal
(any sockets ,
z. B. device inputs, current flowing)
Any value (1 word/2 bytes) in
SIMOCODE pro
Positive/negative
0.1 to 50 s in 0.1 s increments
0 to 100% in 5% increments
Analog value recording
Trigger edge
Sampling rate
Pre-trigger
8-3