Standard Functions - Siemens SIMOCODE pro System Manual

Motor management and control devices

Hide thumbs Also See for SIMOCODE pro:

Table of Contents

Standard functions

In this chapter

In this chapter you will find information about the standard functions stored

as function blocks in SIMOCODE pro. Standard functions are typical motor

functions that can be activated according to need and, as applicable,

individually set for each motor feeder.

Target groups

This chapter is addressed to the following target groups:

• Configurators

• Programmers of application programs for reference purposes.

Necessary knowledge

You will require the following knowledge:

• The principle of connecting plugs to sockets

• Motor protection

• Control functions, control stations.

Navigation in SIMOCODE ES

You will find the dialogs in SIMOCODE ES under:

Further function blocks > Standard functions.

SIMOCODE pro

GWA 4NEB 631 6050-22 DS 03